Product Overview
This inflatable park for sale is a land-based play complex combining inflatable obstacles, climbing sections, slides and younger-child activity areas. It is used in family entertainment centers, indoor recreation halls and temporary outdoor event spaces.
Technical Specifications
|
Specification |
Commercial Standard Detail |
|
Material Composition |
0.55mm - 0.9mm Industrial PVC (Phthalate-free/Fire-retardant) |
|
Frame Support |
Q235B Galvanized High-tensile Steel Support Systems |
|
Sewing Tech |
12-ply Nylon Thread with Multi-layer Internal Ribbing |
|
Air Management |
1.5HP - 2.0HP High-efficiency Centrifugal Blowers |
|
Safety Features |
Emergency Pressure Release Valves & Integrated Safety Netting |
|
Surface Finish |
Anti-slip Texture with High-gloss UV Protective Over-oil |
Key Features
Reinforced Entrances for Repeated Foot Traffic
The park uses 0.55–0.9 mm PVC with five-layer reinforcement at entrance and exit areas. As participants repeatedly step, kneel and turn at these concentrated traffic points, the added layers spread the rubbing and pulling over a reinforced section of the inflatable body.
Supported Geometry During Active Play
Internal ribbing works with continuous-air centrifugal blowers in the 1.5–2.0 HP range. When participants land or shift weight across an obstacle, the ribs constrain panel movement while the airflow supports recovery of the inflated form between successive loads.
Separated Routes for Different Activity Levels
Dedicated younger-child zones and netted boundaries separate low-level exploration from faster climbing and sliding routes. During mixed-age sessions, these physical divisions reduce direct crossings between children moving at different speeds and keep the quieter activity area clearly defined.
Custom Inflatable Parks
Room surveys, column positions and the intended activity mix establish the starting layout. Koabloom develops the obstacle sequence and fabrication pattern for the chosen space, then produces the individual sections as a coordinated park. Changes to one obstacle are checked against neighboring sections so that the assembled route follows the approved plan.
Customizable Items
- Overall park length and width
- Obstacle shapes and sequence
- Slide and climbing heights
- Connection positions between sections
- Theme graphics and color blocks
Collaborative Team
Quality Control
Cut panels are checked for dimensional accuracy and matching orientation before sewing. Production inspection covers stitch continuity, attachment positioning and the fit of adjoining bodies; mismatched sections are corrected before full assembly.
The completed park undergoes a 48-hour inflation endurance check. Inspectors examine the assembled geometry, abnormal deformation and the behavior of the air system. Product labels, electrical component identification and accessory quantities are checked before packing.
FAQ
Q: What is the minimum order quantity?
A: The minimum order is 1 set.
Q: What are the payment terms without installation service?
A: For a custom park without our installation service: 30% deposit and 70% before shipment, payable in USD.
Q: Is the inflated footprint the entire space required?
A: No. Add the access routes, blower-service area and equipment clearances shown in the installation layout.
Q: What should happen after a drink spills on an obstacle?
A: Close the affected section, remove the spill and dry the play surface before reopening it.
Hot Tags: inflatable park for sale, China inflatable park for sale manufacturers, suppliers, Playset with Climbing Wall, Commercial Playsets Outdoor, Equipment for Preschool, Playground Sets for Schools, Outdoor Play House Plastic, Wooden Play Structure Outdoor
